Gear Reducers & Multipliers (16) |
VIEW PRODUCTS | |
Flex Couplers (8) |
VIEW PRODUCTS | |
Flanges (13) |
VIEW PRODUCTS | |
Pulleys (13) |
VIEW PRODUCTS | |
Clutches (11) |
VIEW PRODUCTS | |
Oil (20) |
VIEW PRODUCTS | |
Pump Rails and Feet (4) |
VIEW PRODUCTS | |
Showing 17–32 of 85 results
-
Gear Reducer for 2.2 to 1 Reduction, Dual Bearings, 1-1/8″ Shafted Engines, 11 to 24 HP, J609B (47 and 66 Series at 1450 RPM)
-
1 to 1.9 Multiplier, 540 RPM PTO, 1 3/8″ Spline Shaft, up to 10 HP Pumps (47 and 66 Series)
-
24 mm x 5/8″ (Finger)
-
24 mm x 1-7/8″ (Finger)
-
ZG184TC
Specifications
24 mm x 1 1/8″ (Finger) -
24 mm x 1 3/8″ (Finger)
-
24 mm x 1″ (Jaw) for use with ZF811 on 8 to 11 HP Engines
-
ZGL199
Specifications
24 mm x 1 1/8″ (Jaw) for use with 5 HP 184TC Frame and 213/215 TC Frame -
For NEMA-C Electric Motors 184TC Frame, 3 and 5 HP (Series 50 Pumps)
-
For NEMA-C Electric Motors, 56C, 145TC and 182TC Frames, 1-1/2 and 2 HP (Series 49, 50 ET and EP)
-
Gas Engine Flange for 8 to 11 GP Gas Engines (TT9351 or TT9441 Pumps)
-
Gas Engine Flange for 3.5 to 8 HP Gas Engines (TT/TP Series 51 Pumps)
-
For NEMA-C Electric Motors 56C Frame (TT/TP Series 51 Pumps)
-
3.94 in. / 100 mm, 2 Groove, A Section, Aluminum
-
5.51 in. / 140 mm, 2 Groove, A Section, Aluminum
-
6.30 in. / 160 mm, 2 Groove, A Section, Aluminum