General Pump offers gear reducers, couplers, flanges, pulleys, clutches, oil, etc. to support our pumps.
Gear Reducers & Multipliers (16) |
VIEW PRODUCTS | |
Flex Couplers (8) |
VIEW PRODUCTS | |
Flanges (13) |
VIEW PRODUCTS | |
Pulleys (13) |
VIEW PRODUCTS | |
Clutches (11) |
VIEW PRODUCTS | |
Oil (17) |
VIEW PRODUCTS | |
Pump Rails and Feet (4) |
VIEW PRODUCTS | |
Showing 1–16 of 82 results
-
Flange Kit. Allows NEMA 56C flanged pumps (with 3/4” hollow shaft) to attach to J609A gas engines.
-
Kit, Rails for Emperor Platinum Pumps
-
Kit, Rails, 2-5/8″, 47, 66 Series, Tall
-
Kit, Rails,1-3/8″, 47, 66 Series, Large
-
Kit, Rails, 7/8″, 44, 63 Series, Small
-
12 Volt Double “A” Groove Clutch Adapter Kit for 47, 66 and ES/ESN Series Pumps, No Pulley
-
Browning Type “H” bushing, 1-7/8″, SD Type
-
Browning Type “H” bushing, 30 mm, Universal
-
ZP3B60
Specifications
Pulley, 6.35 OD, 3 Groove, SD (can be used in the CE1541 to HTCK4050S conversion) -
ZP3B136
Specifications
Pulley, 13.95 OD, 3 Groove, SK (can be used in the CW1541 to HTCK4050S conversion) -
For NEMA-C Electric Motors, 213TC, 215 TC and 184TC Frames, 5 and 7-1/2 HP (Series 66, 47, 48 ES/ESN)
-
For NEMA-C Electric Motors, 213TC, 215 TC and 184TC Frames, 5 and 7-1/2 HP (Series 66, 47, 48, ES/ESN)
-
For NEMA-C Electric Motors 184TC Frame, Use with ZG184TC Coupler (Series 63, 44, ET and EP)
-
For NEMA-C Electric Motors
-
Gear Reducer for 2.2 to 1 Reduction, Dual Bearings, 1/1/8″ Shafted Engines. 20 to 31 HP, J609B (47 and 66 Series at 1450 RPM)
-
Gear reducer for 2.2 to 1, 1″ Shaft, Honda® Approved for GX240-GX390, 47 and 66 Series pumps